The Halo also has a few internal controls reached by taking the back off the enclosure:
1.
Kill-dry switch: this is factory set to the ‘off’ position, which you would use for typical in
front of the amp and in amplifier serial FX loops. For amplifiers with parallel FX loops, this
should be set to the ‘in’ position when placed in such a loop.
Figure 4: Kill-dry in the ‘off’ position (factory setting)
!
Halo Chorus user manual v1.01
!
7
Delay time
trimpot
Kill-dry
switch
Waveform shape
jumper
DO NOT
adjust
these two
trimpots
