4
Connecting through D-SUB signal connector
1.
Make sure that the system power is
turned off.
2.
Connect the computer end of the D-
SUB cable to the 15-pin output
connector on the video board of your
computer.
3.
Connect the monitor end of the D-
SUB cable to the D-SUB receptacle on
the back of the monitor.
Connecting through BNC signal connector
1.
Make sure that the system power is turned off.
2.
Connect the computer end of the BNC cable to the
output connector on the video board of your
computer.
3.
Connect the monitor end of the BNC cable to the
BNC receptacle on the back of the monitor.
)
If you connect the monitor to an older type Apple Macintosh through a D-
Sub cable, you need to use the Macintosh adapter provided with the
monitor to connect the video signal port of your computer and the monitor
signal cable.
Содержание DV19NF
Страница 2: ......
