Diamond Shield Zapper IE, Инструкция по эксплуатации

Страница: 18 / 24

Diamond Shield Professional
Instruction Manual
Page 18
Operating options

Pressing the start button will stop the execution. Pressing the
start button again allows the execution to proceed.

Intensity is set by using the arrow keys to move up and down
(
"+" - keys and "
–
").

Pressing the EXIT button cancels the execution.
Menu „
Settings
“
This menu is used to configure the device. The settings made here
are retained even after turning off or changing the battery.

Language
: Select from English or German. The input is
done with the arrow keys left and right.

Contrast
: Adjusts the contrast of the LCD display. The input
is done with the arrow keys left and right.

Const amps:
enables or disables constant current control. If
you press the left and right arrow then the input is done. If
'NO ' is selected, the intensity of all the frequency programs
(including those that are stored on the chip cards) is usually
set on the voltage and does not have a constant current
control.

Speaker:
the tone pitch of the internal speaker. Use the
arrow keys left and right to choose 4 or 5 kHz.

HW Rev.:
Displays the hardware version of the device.