10
6.
Once you are certain that the card is installed properly in its slot, secure it to the
computer frame with the screw you removed in step 2. Make sure the card does
not lift out of the AGP slot while tightening the bracket screw.
7.
Connect your VGA monitor cable to the 15-pin connector on your card.
8.
Secure your computer cover and reboot your computer.
9.
Continue with the software installation for your operating system in the
following sections.
S
OFTWARE
I
NSTALLATION
Now that you have installed your new Diamond graphics card and rebooted your
computer, complete your installation using the following directions.
Windows 98/95 and Windows NT 4.0
There are two ways to install the software for your Diamond graphics card:
♦
Take advantage of Diamond’s installation utility and make installing your drivers
and Diamond software quick and easy. See
Quick Installation of Diamond Drivers
and Utilities
.
♦
Install the drivers for your card manually from the Windows
Display Properties
dialog. See
Manual Installation of Diamond Drivers
.
