31
Using multiple adapters
Up to 6 monitors can be connected to one computer
simultaneously. To connect multiple adapters, install the
drive as described in the
Installation
section and then
connect the adapters to a computer.
Note:
Only the first connected adapter can be configured to
extended mode and the others will be forced to mirror mode
if using a low-end or poor conditional computer.
Disconnect the adapter
The add-on monitor goes blank when the operating system
goes into standby, hibernate mode or even disconnection.
All windows and icons will move to the primary screen. Once
the system is activated or reconnected again, the display
mode will return to the previous mode before disconnecting.
However, some windows or icons may not remove back to
the screen of add-on monitor.
32
Note:
The connected monitor(s) will still remain on the
configuration page after disconnecting the DVI connector
from a monitor.
To return the original status on the configuration page,
remove the USB cable from USB connector.
