DIAMOND AIRCRAFT
HK 3 6 TS
FLIGHT MANUAL
Normal Procedures
4 . 2 . 4
removal
To remove the wing reverse the procedure .
4 . 2 . 5
instal l ation
1 . Clean the bolt s and bushes i f necessary .
C.A.UT I ON
Do not lubricate the threaded bol t s !
2 .
Install winglet with washers and self locking nut s .
3 .
Tighten self locking nuts with moderate hand force
/ 4 . 5 ft . lbs . )
4 . Apply water res istant adhesive tape to the gap .
4 . 2 . 6
removal
TO remove the winglet reverse the procedure .
4 . 2 . 7 Horizontal stabilizer install at ion
( appr . 6 Nm
1 . Clean all bushes and bolt s and apply a sl ight coat of grease .
2 . Move the trim knob to full NOSE DOWN position .
3 . Remove the Pitot tube .
4. pos ition the horizontal stabil i z er over the stabilizer mount ;
the elevator control rod must be connected by a second person .
W.A.R.N I NG
The elevator control rod is not connected automati cally !
Revis ion No .
Date
Source
Doc . No .
Issue
Page No .
3 . 0 1. 0 6
Jan 1 9 9 6
4 - 5
