Dialogic SCbus Linecard Installation and Replacement
R3B
ã
Aug 2001 Ericsson Enterprise AB
24
25. From the Parameter list, select
BLTInterrupt
.
26. From the Value list, select
5
.
27. Click the Telephony Bus tab; then from the Parameter list, select
PCMEncoding
.
28. From the Value list, select the PCM encoding scheme used by your telephone switch.
If the PCM encoding used by the
telephone switch is…
Then…
µ-Law
Select
ULAW
in the Value list.
A-Law
Select
ALAW
in the Value list.
29. Click the Country tab; then from the Parameter list, select
Country
.
30. From the Value list, select your country.
31. From the Parameter list, select
Frequency Resolution
(if available).
32. From the Value list, select
FREQRES_HIGH
.
33. When you have finished configuring the linecard, click
Apply,
then
OK
to apply the
changes you have made.
34. Repeat steps 15–33 for each Dialogic linecard installed in the platform.
35. Proceed to “Setting the Dialog Service Startup Mode—SR5.01.”
