UM-PM-022
DA9318 Direct Charging Reference Board
User Manual
Revision 1.0
1-Mar-2017
CFR0012
19
of
27
© 2017 Dialog Semiconductor
Figure 13: GUI Setup Finish and Launch
6. Click
Finish
.
Once the installation is completed, you may need to restart your computer.
When the software is installed, insert the USB cable before applying V
SYS
and V
IN
. The DA9318
SmartCanvas
software can be started after power up.
6.2
Initial USB Connection
On connecting the USB to the PC for the first time, the SAM3U USB driver will request driver
updating/installation from the Windows operating system. On Windows 7 (32-bit) operating systems
(OS) the driver usually installs automatically. On Windows 7 (64-bit) machines it is common for the
complete driver installation to fail. If this happens, install the driver manually by following these steps:
1.
Control Panel
→
Devices and Printers
(double-click device with yellow exclamation sign).
2.
Update Driver
.
3.
Browse my computer for driver software
.
4. Select the
Driver
folder location:
C:\Dialog Semiconductor\Power Management\DA9318
Reference GUI\Driver
.
5. If Windows warns about the driver, select
Install anyway
.
6. Remove the USB cable and then re-insert it into the reference board.
