Dialighting IW19-10 ZOOM, Руководство пользователя

Страница: 13 / 20

Enter MENU mode, select Special Functions , press the ENTER button to confirm, use the
UP/DOWN button to select Fixture Maintenance or Factory Setting .
Fixture Maintenance
To select Fixture Maintenance , press the ENTER button to show the FIXTURE
MAINTENANCE on the display. Use the UP/DOWN button to select Interval or Remain Time .
Interval
To select Interval, press the ENTER button to confirm, the interval time will be shown on the
display. Press the MENU button to exit.
Remain Time
To select Remain Time, press the ENTER button to confirm, the remaining time will be shown
on the display. Press the ENTER button to confirm, use the UP/DOWN button to select Exit or
Reset time , press the MENU button to exit.
Factory Setting
To select Factory Setting , press the ENTER button to show the FACTORY SETTING on the
display. Press the ENTER button to confirm, use the UP/DOWN button to select No or Yes (the
fixture will reset to factory settings and exit menu mode).
3.3 Home Position Adjust
In the main functions, hold the ENTER button for at least 3 seconds into offset mode, use the
DOWN / UP button up to select Pan Offset, Tilt Offset or Zoom Offset, and press the ENTER button
to confirm. Use the DOWN / UP button to adjust the home position of the Pan, Tilt or Zoom, Once
the position has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Press and hold the MENU button about one
12D