Document # 9100127225999 / Rv.B 74962
Dialight, 1501 Route 34 South, Farmingdale, NJ 07727
Tel: 732.919.3119 Fax: 732.751.5778 www.dialight.com
Page: 2 of 3
Vigilant
®
Bulkhead
HAZARDOUS VOLTAGE
Turn off the main power source before performing Battery Pack replacement
Loosen the corner captive bolts to
remove the
Light Module
WARNING: DO NOT REMOVE BOLTS
Separate the
Light Module
and the
Base Module
Disconnect the
Battery Pack
from
Base Module
Cut cable tie that secure
Battery Pack
cables
Remove
the (4) M4 screws and washers
WARNING: DO NOT DISCARD HARDWARE
Remove
the damaged the
Battery Pack
Ensure foam pads are in place
(
Light Module
and
Battery Pack
)
Ensure orientation of
Battery Pack
Ensure washers are placed between bracket and plate
(both sides)
ATTENTION: Ensure a gap between bracket and plate
Secure new
Battery Pack
with (4) M4 screws
Torque: 4.3 N-m (38 in-lbs)
