PAGE 12
DIAGENODE
DOUBLE HEAD PERISTALTIC PUMP
USER MANUAL
Europe Diagenode sa
/ CHU - Tour GIGA - B34 - 3e étage // Avenue de l’Hôpital, 1 // 4000 Liège (Sart Tilman) // Belgium // Phone: (+32) 4 364 20 50 // Mail: info
@
diagenode.com
Connect a piece of silicone tube with the lower part of the connecting tool which is connected to warm flow. This piece of
tubing will determine the level of water in the Bioruptor’s tank as the circulator is “sucking” the water from this opening.
This will be done later when the circulator is filled with water. The tubing can be cut gradually with a pair of scissors to
allow a progressively higher level of water. The required level is determined by the blue line “water level”) in the tank.
Connect a second piece of silicone tube with the lower part of the connecting tool which is connected to cold flow. Cut a
piece long enough to allow the water flow going into the water.
For the connection of a second sonication watherbath
(Bioruptor Twin) please proceed exactly the same way.
Option 2:
Place 2 black plastic connectors on the
motor plate
standing on the waterbath as shown on picture below.
Screw the plastic nut on the thread over the
motor plate
.
Do it for both holes and set the motor plate on the top of the waterbath.