7
installation must be photographed as well. Special care must be taken with elements of the anchoring
system which are going to be covered after the installation. If, on a given location, there are separate
roof areas and different types of anchoring systems are installed, a distinct documentation must be
made for each roof area and each system.
4
Manufacturer’s responsibility, warranty
Manufacturer's responsibility covers faulty products, unless the fault occurred as a result of
inappropriate use. Manufacturer shall only replace faulty or damaged components. No further claims
(indirect or property damage) are acknowledged by the manufacturer.
Because of the unknown site conditions, the manufacturer assumes no responsibility for the
warranty about damage caused by diversion fom the Technical Manual (improper use, incorrect
installation or other reasons).
A major prerequisite of long-term fall protection system operation is regular maintenance as
prescribed by the manufacturer. Should maintenance steps fail to be executed in due time, then the
system can only be used for own risk. Should any damage or accident happens on an unchecked
system the manufacturer's responsibility shall terminate.
DiaSafe
®
systems can be extended using original accessories developed exclusively by the
manufacturer. Should any components or products of any other manufacturer be installed or used in
the system, manufacturer's responsibility and guarantee terminate immediately.
Should the system not be installed or assembled by the manufacturer or a contractor authorised for
installation, the manufacturer shall accept no claims, other than for faulty products.
Should a fall occur, the system must be discarded and it is PROHIBITED to use it any longer!
System use can only be resumed after an official interim inspection. In accordance with the
inspection, relevant system components or the whole system must be overhauled or replaced. As
long as the distraint or the inspection is not carried out, the manufacturer is not liable for the use of
the system any longer.
Manufacturer shall cease to take any further responsibility for the system in the following cases:
damage and alterations due to environmental conditions, normal wear and tear, misuse and an
aesthetic alteration.
Particular attention has been paid to producing these instructions. However it is not possible to show
all the potential versions and these instructions do not therefore claim to be exhaustive. DIADEM
®
APP GmbH shall not be liable for any usage or application error, which may arise from the
misinterpretation of the methods shown here.
4.1
General terms of warranty
For the DiaSafe
®
fall protection anchoring systems range, we undertake a General Manufacturer’s
warranty of
60 months
, valid from the day of the sale of the product by Manufacturer.
The warranty does not cover:
Any loss of time, inconvenience, administrative costs or any other consequential damages
suffered by the owner/maintainer as a consequence of a malfunction under warranty.
Repair or replacement of spare parts, due to the following causes:
Wear and tear from normal use.
Damage or alteration due to negligence or improper use.
Activated fall arrest function, requiring replacement.
Any modification of the system, or of any part thereof, without the manufacturer’s approval.
Uses not intended or expressly prohibited by the manufacturer.
