Product Use / Start Cleaning
According to different cleaning needs, the product has a variety of cleaning modes to choose
from. You can start various cleaning modes through a host, remote control or app
Automatic cleaning
Applicable scenario: The robot will scan and generate a map and intelligent partition according to
the actual home environment after start up.The cleaning path is planned by means of edge
cleaning first and bow-shaped filling, and each partition is cleaned one by one in an order¦y and
efficient,fu¦¦ coverage without omission.
Setting method: turn on the host power in the shutdown state, after hearing robot voice prompt
press start button or touch the APP /the romote " " key, robot wi¦¦ start automatic cleaning.
Partia¦ c¦eaning
Applicable scenario: It is applicable to the ground environment where garbage is concentrated.
Press partia¦ c¦eaning button to start c¦eaning, whi¦e robot is on standby or suspended mode.This
mode is used to c¦ean the square area with 1.5x1.5 meters as the center of the robot.After the
cleaning robot will automatically return to the start point then stop cleaning.
Setting method: Press partia¦ c¦eaning button in the APP or the romote " " to start partial
cleaning.
Zoning cleaning
Setting method: use APP to set zoning c¦eaning function, robot wi¦¦ go to c¦ean p¦anned area on
the phone
Designated spot
Setting method: use APP to specify the target point on the map, robot wi¦¦ go to the designated
place automatically.
Suction adjustment
Setting method: press the button / / APP contro¦ to adjust the suction power .
Manual Control
Setting method: press direction button in APP or remote contro¦ to contro¦ robotgoing forward,
backward and turns.
Virtual wall
Setting method:press virtua¦ wa¦¦ in APP to draw the virtua¦ wa¦¦ ¦ine.
You can use virtual wall to isolate the areas that do not want to be cleaned.
