manualshive.com logo in svg

Di-soric ID-01, Руководство пользователя, Страница: 37 / 222

Поделиться
Скачать
Di-soric ID-01 Скачать руководство пользователя страница 37

ID-01 Laser Scanner User’s Manual

2-13

Quick Start

Send/Receive Options

To access 

Receive

, 

Save

 and 

Default

 options, click the 

Send/Recv

 button: 

You can also access this selector by right-clicking in any of the configura-

tion views.

Receiving

From the Send/Recv selector, select 

Receive Reader Settings.

Caution

: Do not select this option if you do not want to upload the scanner’s settings. For 

example, if your di-soric ID file has a number of custom settings that you want to maintain 

and download into the scanner, these settings would be lost by choosing Yes.
This is useful if you want to receive (upload) the scanner’s settings and save them as a 

computer file for later retrieval. For example, if your scanner has settings that you do not 

want to change, choosing Yes would allow you to load those settings to di-soric ID and 

save as an di-soric ID file for later retrieval.
Receiving the scanner’s settings will also assure that you will not be subsequently saving 

any unwanted changes that you or someone else previously made in di-soric ID. 

Saving

1.

Send, No Save

.

(same as 

<A>

)

This saves di-soric 

ID settings to cur-

rent memory. 

2.

Send and Save

. 

(same as 

<Z>

)

This activates all 

changes in current memory 

and

 saves to the scanner for power-on.

3.

Send and Save as Customer Defaults

.

(same as 

<Zc>

)

(This option will be visible only if you had checked Enable ‘Send and Save as Cus-

tomer Defaults’ in di-soric ID Preferences in the Options menu.)

Use this to save your own set of default settings that you can quickly retrieve with a 

<Zrc>

 command.

For more on defaulting and saving settings, see "Defaulting/Saving/Resetting" on page A-

1

3

.

Содержание ID-01































































































































































































































Отзывы:

Нет отзывов