Di-soric ID-01, Руководство пользователя, Страница: 142 / 222

7-6
ID-01 Laser Scanner User’s Manual
Matchcode Type
Match Length
When more than one master symbol is enabled, the maximum number for each additional
symbol diminishes as shown here:
Wild Card Character
Usage: For example, if Match Length is set to 6 in a 10 character symbol, and
Match Start Position is set for 2 , only the 2nd through 7th characters (from
left to right) will be compared.
Definition: Defines the length of the character string that will be compared with that of
the master symbol when Match Start Position is set to 1 or greater. When
Match Start Position is set to 0 , no comparison will occur.
Serial Cmd: < K223, matchcode type,sequential matching,match start position,
match length ,wild card character,sequence on noread,sequence on mis-
match >
Default: 1
Options: 1 to 64
# of Symbols: 1 2 3 4 5 6 7 8 9 10
Maximum
characters:
64 64 42 32 25 21 18 16 14 12
Usage: For example, with Wild Card Character defined as the default asterisk,
defining CR*34 as the master symbol will result in matches for CR 1 34,
CR 2 34, but not CR2345. Entering the wild card at the end of the master
symbol as in CR* will result in matches for variable symbol lengths such as
CR 1 , CR 23 , CR 358 , etc.
Definition: Wild Card Character allows a user to define a wild card character as part
of the master symbol.
Serial Cmd: < K223 , matchcode type,sequential matching,match start position,
match length, wild card character ,sequence on noread,sequence on mis-
match >
Default: * (asterisk)
Options: Any valid ASCII character