DI Lusso R6, Инструкция по установке и эксплуатации

Страница: 16 / 24

13
13. Slide the Left hand baffle to the left and the
right hand baffle to the right, push them
towards the rear of the firebox so that the
baffles drop down and sit tightly together as
shown -
F
ITTING THE FRAME PACK
1. Loosen the four M6 Nuts to the ends of the
studs on the convection chamber sides.
2. Slide the frame into position, making
sure that the lower inner edge of the
frame is in line with the base of the
stove, and tighten the nuts with a
10mm spanner.
3. Place a round spacer (supplied with
the frame pack) over each of the
fascia studs.
4. Offer the door fascia into position,
passing the five M6 studs through the
holes. Ensure that the fascia is resting
on the two clips at the top of the door
and fix in position using the nuts and
washers provided.
Fascia resting
on clips
Support Bracket Tertiary Air Bar