Non-Contact AC
Voltage Meassurements
Torch
Press and hold the top button to turn the torch on.
Release the button to turn the torch off.
Data Hold
To freeze the current reading on the LCD, press the
“Hold Backlight” key. The word HOLD will appear on the
LCD while the meter is in the Data Hold mode. To release
the Data Hold function and return the meter to normal
operation, press the “Hold Backlight” key again. The
word HOLD will switch off.
MAX Hold
To hold the highest reading on the LCD, press the MAX
hold button. The MAX hold button is located on the left
side of the meter (bottom button). The meter reading will
not change as readings change, rather it will only display
the highest reading encountered since the MAX hold
button was pressed. Press the MAX hold button again to
return to normal operation.
Auto Power Off
The auto off feature will turn the meter off after 7 minutes.
Battery Replacement
1. When the low battery symbol appears on the
LCD the batteries must be replaced.
2. Power down and remove the rear battery
compartment Phillips screw.
3. Lift off the battery compartment cover and replace
the two 1.5V AAA cells.
4. Replace compartment cover and secure the screw..
Operations
