Dhollandia DH-RM.25, Руководство по установке, Страница: 8 / 79

7
DHOLLANDIA
NOTICE

Make sure the vehicle battery power is disconnected while installing the tail lift. Connect the battery power to the tail lift only
when the installation is completed, or as required in the installation instructions.

Except for the support channels and bracing of the side steps, which are usually welded to the cross members of the auxiliary
chassis, DHOLLANDIA tail lifts are designed as a bolt-on system, and don’t require any welding. See Appendix 2 for
prescribed torque values.

Welding should be done by qualified personnel only, and only to the extent allowed by the vehicle manufacturer. Ensure that
the positive and ground cables are disconnected from the batteries, and that all vehicle electrical and electronic equipment is
fully isolated before welding.

ALWAYS keep the ground clamp as close as possible to the weld location.
WARNING

NEVER modify DHOLLANDIA tail lifts or their mounting plates, NEVER deviate from the described installation procedures
without prior written consent by the manufacturer.

DHOLLANDIA disclaims liability for any personal injury and / or property damage that results from improper use.