42
DHOLLANDIA
Before lifting or lowering loads, make sure the loads are secured on the
platform surface. Deploy the platform cart stops (if so equipped), lower loads
on a pallet jack down on the platform surface or immobilize the load via
equivalent securement device.
LIFT the platform off the ground. Use the
AUTOMATIC TILT to return the platform to
level pitch.
Make sure you comply with load charts and
instructions at all times.
LOWER the platform to the ground. At the
ground, use the AUTOMATIC TILT to
decline the platform to the ground.
Closing up in travel position
Fold the bridge plate back onto the vehicle
floor.
Close the cart stops.
Make sure the platform is below the rear
door bottom level and close the rear doors.