Dhollandia DH-CH003, Руководство по установке

Страница: 16 / 59

15
DHOLLANDIA
1.7.2 Safety measures

DHOLLANDIA lifts are equipped with a multiple safety devices to enable its intended use with a maximum degree of safety for
the operator, the wheelchair occupant on the platform and any incidental bystanders. The following safety devices are
incorporated on the DH-CH... Series:
N° Description Image
1 Non-slip surface: the platform surface incorporates an non-slip profiling to
prevent the operator and platform occupants from slipping and falling.
2 Roll stop: roll stop mounted at the outboard platform edge. The roll stop is tilted
up automatically when the platform leaves the ground, it is tilted down
automatically when the platform touches the ground.
The roll stop prevents the wheelchair from slowly and unexpectedly rolling off
the platform during lifting and lowering. It is not designed to stop fast and
powered movements.
3 Handrails: Rails mounted at both sides of the platform. Lift occupants should
hold on to these handrails to prevent them from falling off the platform.
Handrails must be deployed manually and secured in vertical position prior to
using the lift, they must be stowed manually before retracting the lift back into
its travel position.
On DH-CH101*, foldable extensions [# 9a] to the handrails are available as an
option (option OWP013).
4 Bridge plate: plate mounted at the inboard platform edge, used to bridge any
gap between the platform and the vehicle floor when the platform is raised to
its maximum height.
The bridge plate tilts down automatically as the platform approaches the vehicle
floor. It tilts up automatically as the platform lowers to the ground.
It also forms a toe-guard for the operator and the wheelchair occupant while
travelling up / down on the platform.