Chapter 2: RM3200D System Design
2.3 Hardware Modules
2 - 13
2.3.2.1 Digital Input Module RM330-113
2.3.2.2 Digital Input/Output Module RM330-111
2.3.2.3 Digital Input/Output Synchronization Module RM330-112
•
2 AES/EBU inputs (two channels each),
SPDIF also possible
•
15-pin Sub-D-socket (female)
•
Asynchronous sample rate converter (26 -
54kHz input sampling frequency)
•
Dynamic range better than 120dB
(-60dBFS)
Figure 5: Digital Input Module RM330-113
•
2 AES/EBU inputs (two channels each),
SPDIF also possible
•
2 AES3/EBU outputs (two channels each),
Dither 16/20/24Bit switchable, SPDIF also
possible
•
2 asynchronous sample rate converters
SRC (26 - 54kHz input sampling frequency)
•
SRCs are configurable as input SRC
(normally) or output SRC (the inputs are in
this case used as source for
synchronization)
•
Dynamic range better than 120dB
(-60dBFS)
•
15-pin Sub-D-socket (female)
•
Setting of the most important channel status
bits (Consumer/Prof., Sample Rate,
Channel Mode)
Figure 6: Digital Input/Output Module RM330-111
•
Figure 7: Digital Input/Output Module RM330-112