DH AZ-EL Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 20

DH AZ-EL Скачать руководство пользователя страница 2

Congratulations! You have now purchased the finest AZ-EL mount available. This
unit has been designed to give you the most stable system to work on a single pole
application. Assemble using these instructions. If you have any questions please
call 800-627-9443 for help.

The AZ-EL Mount is designed to go with the 3.0m, 3.7m, 3.8m, 4.2m* and the 4.5*
meter antennas. As all are identical in theory, we will cover the basic installation first
and address each individually as the installation requires.

PLEASE READ COMPLETE

INSTRUCTIONS BEFORE BEGINNING INSTALLATION!

If you will be storing the antenna for a period of time, a one piece antenna is to be
laid flat on a level surface. Always store the antenna on its outer lip.

Shipping

Warranty for missing parts is detailed on the last page of the manual.

A detailed parts

list is provided on the page prior to the “shipping warranty”.

Please refer to this

section immediately on delivery.

DH Satellite

P.O. Box 239
Prairie du Chien, WI 53821
Phone: (608) 326-8406
Fax: (608) 326-4233

8 a.m. to 5 p.m. C.S.T

.

Sectional antennas must be handled with care not to

twist or distort sections while handling for installation.

48” AZ – EL MOUNT

INSTALLATION INSTRUCTIONS

PARTS LIST

1 - DH Antenna

1 - AZ-EL Mount 48" Back Ring
1 – 5 1/2"

I.D. Base Can

8 - Back Braces for 3.0m and larger

4 - Feed Struts

1 - Feed Collar
1 - Elevation Tube
1 - Elevation Tube Bracket

1 - Bolt Bag to include all Hardware

(see page 13)

0

ϰ

/1

ϲ

/20

ϮϬ

*Galvanized back braces please immediately
read special note on bolt bag page 13.

*4.2m/4.5m end date 6-1-18

«
1
2
3
4
...
»

Содержание AZ-EL





















Отзывы:

Нет отзывов