background image

 

3

Safety instructions                                                 

 

NOTES 

1.

 

Read these instructions. 

2.

 

Keep these instructions. 

3.

 

Heed all warnings. 

4.

 

Follow all instructions. 

5.

 

Do not use this apparatus near water. 

6.

 

Clean only with dry cloth. 

7.

 

Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do 

not put product on bed, sofa or anything that blocks ventilation. Install according to the 

manufacturer’s instructions. 

8.

 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 

(including amplifiers) that produce heat. 

9.

 

Read, heed and follow all instructions to ensure correct and safe installation and interconnection of 

the apparatus. 

10.

 

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, 

such as vases, shall be placed on the apparatus. 

11.

 

The mains socket-outlet shall be installed near the apparatus and the mains plug shall remain readily 

operable. 

12.

 

Protect the power cord from being walked on or pinched particularly at plugs, convenience 

receptacles, and the point where they exit from the apparatus. 

13.

 

Only use attachments/accessories specified by the manufacturer.   

14.

 

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the 

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid 

injury from tip-over. 

15.

 

Unplug the apparatus during lightning storms or when unused for long periods of time. 

16.

 

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been 

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or 

objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not 

operate normally, or has been dropped. 

17.

 

The apparatus shall be connected to a mains socket outlet with a protective earthing connection. 

 

Do not touch the color TFT LCD screen by hand directly. 

 

 

 

 

 

 

 

Содержание DG-FV32LCD









































Отзывы: