10
Remote Control
Preparation of Remote Control
Place the remote control on an even surface and
insert the supplied batteries into the remote
control as follows.
1.
Softly push the back cover to open the
battery compartment.
2.
Insert two batteries (1.5V, size AAA), please
make sure the polarity matches the marks
inside the compartment.
3.
Softly press the back cover to close it.
Under normal use the battery will
last approximately six months.
Remove the batteries when the
product is not to be used for an
extended period as damage may
result from corrosive leakage
invalidating the warranty.
Batteries shall not be exposed to
excessive heat such as direct
sunshine, fire or the like.
Using of Remote control
Point the remote control unit from no more than
about 7m from the remote control sensor and
within about 60 degrees of the front of the unit.
The operating distance may vary depending on
the brightness of the surroundings.
Do not point bright lights directly at
the remote control sensor.
Do not place objects between the
remote control unit and the remote
control sensor.
Do not use this remote control unit
while simultaneously operating the
remote control unit of any other
equipment.
Содержание DG-FHD42LCD
Страница 6: ...5 Controls and connections Rear Panel...
Страница 40: ......
