NJL/GTECH- 3/10/06 Revision No.3
14
COMMISSIONING THE FIRE :
Remove the control valve cover by pulling it forward. Fig. No. 9. Slacken the pressure test point
sealing screw and connect a suitable pressure gauge.
The gas control valve is fitted with a piezo spark ignitor, maximum and minimum flow adjusting screws, and
a pressure test point. If the main burner or pilot goes out for any reason DO NOT attempt to relight the pilot
for three minutes
.
Remove the control valve cover by pulling it forward (fig no 26). Slacken and remove the pressure test point
sealing screw and connect a suitable gauge.
P
IL
O
T
OF
F
Remove control
cover by pulling
forward.
Fig 26
Pressure
test point.
Fig 27
Control with cover removed.
High rate
adjustment
screw
Low rate
adjustment
screw
Fig 28
