dg_usb3.0_dev_ip_demo_instruction_en.doc
15 May 2015
Page 8
2
2
2
2----2
2
2
2
Xilinx
Xilinx
Xilinx
Xilinx E
E
E
Evaluation Procedure
valuation Procedure
valuation Procedure
valuation Procedure
For Xilinx USB3.0 Device-IP evaluation, follow evaluation procedure below.
•
Check that both Xilinx board (SP605/ML605/KC705/ZC706 board) and adapter board are powered
off.
•
a) SP605/ML605: Connect USB mini-cable#1 to USB mini-connector on Xilinx board (J4 for
SP605/J22 for ML605) for JTAG programming.
b) KC705/ZC706: Connect USB micro cable to USB micro connector on Xilinx board (U29 for
KC705/U30 for ZC706) for JTAG programming.
•
Connect USB mini-cable#2 to USB mini-connector on Xilinx board (J23 for SP605/J21 for ML605/J6
for KC705/J21 for ZC706) for serial console I/F on HostPC.
•
Confirm that FMC interface voltage is 2.5V, and then connect adapter board (AB07-USB3FMC) to
the FMC-LPC connector on Xilinx board.
•
Confirm that JP1 on the adapter board is not jumped (OFF).
•
Connect USB3.0 AtoA cable with USB connector on the adapter board.
•
Connect opposite side of USB3.0 AtoA cable to the USB3.0 connector of the Host PC.
Figure
Figure
Figure
Figure 10
10
10
10: Adapter board connection to SP605
: Adapter board connection to SP605
: Adapter board connection to SP605
: Adapter board connection to SP605
