dg_toe10gip_cpu_instruction_xilinx_en.doc
23-Aug-19
Page 32
7 FPGA board setup
Please follow topic 4 (FPGA board setup) to prepare FPGA board and SFP+ connection for
running the demo. After two FPGA boards have been configured completely, Serial console
displays the menu to select client mode or server mode. The step after FPGA configuration is
described as follows.
1) Open Serial console for board#1 and board#2. In this document, COM3 is Serial console
for FPGA board#1 which is set to server mode and COM8 is Serial console for FPGA
board#2 which is set to client mode.
a. Set
‘1’ on Serial console of FPGA board#1 for running server mode. Set ‘0’ on Serial
console of FPGA board#2 for running client mode.
b. Default parameters for server or client are displayed on the console, as shown in
Figure 7-1 Input mode
Содержание TOE10G IP
Страница 21: ...dg_toe10gip_cpu_instruction_xilinx_en doc 23 Aug 19 Page 21 Figure 5 2 Change IP parameter result...
Страница 36: ...dg_toe10gip_cpu_instruction_xilinx_en doc 23 Aug 19 Page 36 Figure 8 2 Change IP parameter result...
Страница 40: ...dg_toe10gip_cpu_instruction_xilinx_en doc 23 Aug 19 Page 40 Figure 8 5 Receive data test with data verification...