DG Flugzeugbau DG 202, Руководство по эксплуатации самолета

Страница: 137 / 212

Seite 33
TRT true track
TEN total energy
WDI wind direction
WVE wind velocty
5.3.10 INIT
In the INIT menu you can enter the following parameters:
VARIO FILT. Vario filter
VARIO INT. The selection of the integration time of the interval integrator (normal value: 20 Sek.)
VARIO RNG. Vario range adjustment (2.5, 5 and 10 m/s)
TAB
Audio dead area by SC (range from 0 to
"
2m/s)
AUTO SC
GPS
OFF
100 kmh
Activation of the automatic vario/speed command switch
When circling switches the GPS from speed command to vario.
The switching on is achieved by an external switch (on stick or flaps)
The switching on depends on the speed (adjustable from 100- 160 km/h)
5.3.11 DISPLAY (graphic display)
Here you can select the display contrast (from 0 to 100%), the view angle and the light relation.
5.3.12 PC
In this menu you can transfer data from PC or notebook to the DX 50 or read it from DX 50. Therefor the LXFAI
program should be installed and the right connect cable should be applied (see LXFAI manual).
On the PC the menu TRANSFER has to be opened and the menu PC in the DX 50. With ENTER the timeout from
0 to 9 seconds is counted. If in this time the connection is established the following note appears on the display:
CONNECT
The data transfer is now possible. All the operations are made on the PC. After the transmission has ended the ESC
button on the PC has to be pushed to break the connection. The timeout appears again. The SETUP PC menu is
automatically closed.
If the connection isn’t possible the time will run out and the PC menu will be closed. For all other infirmation about
the data transfer see description of the LXFAI program.
5.3.13 PASSWORD
The menu PASSWORD enables you to adjust some other data which are placed in different submenus (glider and
pilot data …).
This data are secured with PASSWORD:
This password can not be changed:
96990
After the entry of this combination the submenus are displayed: