DG Flugzeugbau DG 202, Руководство по эксплуатации самолета

Страница: 134 / 212

Seite 30
If you answer the question RESTART with Y (yes) your task will be reset, that means that first entered point of the
task will appear as navigation point on the TSK navigation display. Now the task has to be restarted e.g. by second
start when passing the start line or photosector by pushing ENTER button.
IMPORTANT: RESTART has no influence on the declared task in the FAI Logger.
5.3.8 Setup program
In the setup program all parameters that are necessary for the later use of the DX 50 can be programmed.
Figure 16: SETUP mode
The abowe figure shows the display which appers after selecting the SETUP menu. The following diagram shows
the particular submenus of the SETUP mode and their mening or their activation respectively:
QNH RES
ENTER
! ESC
Input of:
QNH (for altitude correction during the flight)
ALT. R = reserve altitude for the final glide
BUGS = the polar deterioration because of midges (BUGS)
in % entered in 2,5% steps to max. 30%
LOGGER
ENTER
! ESC
Input of the FAI Logger parameters (only by DX50 FAI)
INIT
ENTER
! ESC
Input of:
Vario Filter
Vario integration time ( 10, 20 or 30 sec. )
Vario range selection ( 2.5, 5 or 10 m/s)
Speed command audio dead area ( 0 to +-2 m/s )
Autom. Vario-/Speed command turn on: OFF / GPS or TAS
DISPLAY
ENTER
! ESC
LCD contrast ( 0 to 100% )
PC
ENTER
! ESC
PC communication
PASSWORD
ENTER
! ESC
Input of the Password (96990), then skipping into the SETUP
PASSWORD submenu
Figure 17: Structure of the SETUP menu