DFRobotAll Rights Reserved
CC BY-NC 3.0 CN
P a g e
|
7
5
Installing LED Modules
1.1
Installing LEDs
1
）
Fix the aluminum foil, if too large use scissors to cut to paper size (aluminum foil for circuit
"GND")
2
）
Fixing painting to Frame Holder: It support A4 and 9 "x 12" two paper specifications of the
installation; If painting is smaller than A4 size, can use A4 hollow out worked on ways to use.
3
）
Placing the LEDs, make a small hole on the planned area, and mark it for later use.
