33
EN
Attaching the blue plug housing (VW)
Concerns:
Installation configuration 4-5
1
To use the dfreeeze
®
with parking heaters installed ex
works or parking heaters retrofitted as original acces
-
sories, such as Volkswagen, Skoda and Seat, it is
necessary to replace the plug housing X1 and X2 with the
enclosed blue housing.
A step-by-step instruction for retrofitting the cable
adapter for use with the blue VW plug housing can
be found at www.dfreeeze.de/support
Secure the unused cable ends
Concerns:
all installation configurations
1
●
After the installation and test of the dfreeeze
®
system, insulate the unused cable ends, for
example with electrical tape.
5.2
Installation configurations
Please note that, depending on the vehicle, the receiver
must be initialised according to the installation config
-
uration in order to ensure a correct function of the
dfreeeze
®
system. Please also refer to the enclosed
Instruction Manual in this regard.
Installation configuration
Page
1 - Stand Alone with button
34
2 - Stand Alone with pre-selection clock
34
3 - Telestart via W-bus
36
4 - Telestart VW MQB (LIN)
38
5 - Telestart VW PQ (W-bus)
38
6 - Receiver analogue (clock)
40
7 - Receiver analogue (button)
40
Please notify your customer of the
correct installation configuration.
Содержание parking heater remote control
