12 • OPERATION
Attaching a Turbo Saw attachment varies with each skid-
steer. Please refer to your machines owner’s manual for the
proper way to attach your machine to the base plate of the
Turbo Saw attachment. Check your surroundings before
attaching a Turbo Saw attachment.
Care must be taken when attaching the Turbo Saw to the
loader. The base end of the Turbo Saw should not be
raised too high or the boom will lever on the shield and
allow the blade to contact the ground. This could cause
the blade to bend.
INSTRUCTIONS FOR ATTACHING A TURBO SAW
Once the skid steer lines up and fits into the Turbo Saw
base plate, lock the attachment in place. Always clean
quick-release hydraulic couplers before connecting to
prevent dust and debris from entering your hydraulic
system. Then attach the hydraulic lines. Beware of
hydraulic pressure. Wear proper attire like gloves, goggles,
and appropriate clothing.
SPRAYER TANK
5 gallon polyurethane sprayer tank with 12 volt electric
pump is standard on most skid mounted Turbo Saw
attachments.
An adjustable spray tip is located behind the blade shield.
The spray tip is recessed into the frame to limit damage.
The sprayer pump is rated for all water based herbicides.
Only use water based herbicides or warranty will be
voided.
WIRING
ATTACHING / DETACHING
