DFI WL051 Скачать руководство пользователя

Страница: 39 / 54

User's Manual |

WL051

Chapter 3

BIOS SETTINGS

Boot

Setup Prompt Timeout

Set the number of seconds to wait for the setup activation key. 65535 (0xFFFF) denotes

indefinite waiting.

Bootup NumLock State

Select the keyboard NumLock state: On or Off.

Quiet Boot

This section is used to enable or disable quiet boot option.

Boot Option Priorities

Rearrange the system boot order of available boot devices.

BGRT Logo

It is used to enable or disable to support display logo with ACPI BGRT table.

Note:

If “Boot option filter” of “CSM Configuration” is set to “UEFI and Legacy”

or “UEFI only” and “Quiet Boot” is set to enabled, “BGRT Logo” will show

up for configuration. Refer to the Advanced > CSM Configuration for more

information.

Save & Exit

Save Changes and Reset

To save the changes, select this field and then press <Enter>. A dialog box will appear. Select

Yes to reset the system after saving all changes made.

Discard Changes and Reset

To discard the changes, select this field and then press <Enter>. A dialog box will appear.

Select Yes to reset the system setup without saving any changes.

Restore Defaults

To restore and load the optimized default values, select this field and then press <Enter>. A

dialog box will appear. Select Yes to restore the default values of all the setup options.

Boot Override

Move the cursor to an available boot device and press Enter, and then the system will

immediately boot from the selected boot device. The Boot Override function will only be

effective for the current boot. The “Boot Option Priorities” configured in the Boot menu will not

be changed.

►

Save Setting to file

Select this option to save BIOS configuration settings to a USB flash device.

►

Restore Setting from file

This field will appear only when a USB flash device is detected. Select this field to restore

setting from the USB flash device.

Содержание WL051























































Результаты поиска

Содержание WL051

Отзывы:

Похожие инструкции для WL051

Бренды по названию

Популярные бренды

DFI WL051, Руководство пользователя

Результаты поиска

Содержание WL051

Отзывы:

Похожие инструкции для WL051

Бренды по названию

Популярные бренды