DFI SD331-C236 Скачать руководство пользователя

Страница: 19 / 71

Graphics Interfaces

The display ports consist of the following:

• 1 VGA port

• 1 DVI-I (DVI-D Signal) port

• 1 DP port

COM (Serial) Ports

COM 1 port

The pin functions of COM 1 port will vary according to JP7’s setting. JP9 is used to configure

Serial COM ports to pure RS232 or RS232 with power. Refer to “COM1/COM2 RS232/422/485

Select” and “COM1/COM2 RS232/Power Select“ in this chapter for more information.

COM 2 port

The pin functions of COM 2 port will vary according to JP11’s setting. JP14 is used to configure

Serial COM ports to pure RS232 or RS232 with power. Refer to “COM1/COM2 RS232/422/485

Select” and “COM1/COM2 RS232/Power Select“ in this chapter for more information.

COM 3 to COM 6 are fixed at RS232.

The serial ports are asynchronous communication ports with 16C550A-compatible UARTs that

can be used with modems, serial printers, remote display terminals, and other serial devices.

Connecting External Serial Ports

Your COM port may come mounted on a card-edge bracket. Install the card-edge bracket to

an available slot at the rear of the system chassis then insert the serial port cable to the COM

connector. Make sure the colored stripe on the ribbon cable is aligned with pin 1 of the COM

connector.

BIOS Setting

Configure the serial COM ports in the Advanced menu (“SIO NUVOTON6106D” submenu) of

the BIOS. Refer to the chapter 3 for more information.

COM 1:

RS232/422/485

VGA

COM 1

COM 2:

RS232/422/485

COM 3/4/5/6: RS232

DVI-I

(DVI-D Signal)

VGA

VGA Port

The VGA port is used for connecting a VGA monitor. Connect the monitor’s 15-pin D-shell cable

connector to the VGA port. After you plug the monitor’s cable connector into the VGA port,

gently tighten the cable screws to hold the connector in place.

DVI-I Port

The DVI-I (DVI-D Signal) port is used to connect an LCD monitor. This port supports DVI-D

signal only.

Connect the display device’s cable connector to the DVI-I port. After plugging the cable con-

nector into the port, gently tighten the cable screws to hold the connector in place

DP Port

The DP port which carries both digital audio and video signals is used to connect a LCD moni-

tor or digital TV that has the DP port.

BIOS Setting

Configure the display devices in the advanced menu (“Video Configuration” submenu) of the

BIOS. Refer to the chapter 3 for more information.

Содержание SD331-C236








































































Результаты поиска

Содержание SD331-C236

Отзывы:

Похожие инструкции для SD331-C236

Бренды по названию

Популярные бренды

DFI SD331-C236, Руководство пользователя

Результаты поиска

Содержание SD331-C236

Отзывы:

Похожие инструкции для SD331-C236

Бренды по названию

Популярные бренды