manualshive.com logo in svg

DFI SB630-CRM, Руководство пользователя, Страница: 132 / 185

Поделиться
Скачать
DFI SB630-CRM Скачать руководство пользователя страница 132

132

6

Intel AMT  Settings

Chapter 6 - Intel AMT Settings

Overview 

Intel Active Management Technology (Intel

®

 AMT) combines hardware and soft-

ware solution to provide maximum system defense and protection to networked 
systems.

The hardware and software information are stored in non-volatile memory. With 
its built-in manageability and latest security applications, Intel

®

 AMT provides the 

following functions. 

• Discover

 

Allows remote access and management of networked systems even while PCs 
are powered off; signifi cantly reducing desk-side visits.

• Repair

 

Remotely repair systems after OS failures. Alerting and event logging help 
detect problems quickly to reduce downtime.

• Protect

 

Intel AMT’s System Defense capability remotely updates all systems with the 
latest security software. It protects the network from threats at the source 
by proactively blocking incoming threats, reactively containing infected clients 
before they impact the network, and proactively alerting when critical soft-
ware agents are removed. 

Содержание SB630-CRM


























































































































































































Отзывы:

Нет отзывов