23
Chapter 2
HARDWARE INSTALLATION
User's Manual |
PR610-C621
The lithium ion battery addendum supplies power to the real-time clock and CMOS memory
as an auxiliary source of power when the main power is shut off. Insert a coin cell battery into
the holder and make sure the polarities are correctly oriented — the cap side (rimmed rounded
edge) is negative and sould be facing the holder; the flat side with a + mark is positive and
should be facing away from the holder.
Safety Measures
• There exists explosion hazard if the battery is incorrectly installed.
• Replace only with the same or equivalent type recommended by the manufacturer.
• Dispose of used batteries according to local ordinances.
Battery Holder
Battery
X
Internal I/O Connectors
SMBus
The SMBus (System Management Bus) connector is used to connect the SMBus device. It is a
multiple device bus that allows multiple chips to connect to the same bus and enable each one
to act as a master by initiating data transfer.
SMBus Pin Assignment
Pin Assignment
Pin Assignment
1
3V3SB
2
GND
3
SMBus_Clock
4
SMBus_DATA
5
SMBus_Alert
6
---
SMBus
X
Internal I/O Connectors
1
5
2
