2
38
Hardware Installation
•
Line-in Jack (Light Blue - CN7)
This jack can be connected to the line-out jack of any external
audio devices such as Hi-fi set, CD player, AM/FM radio tuner,
synthesizer, etc. Connect a stereo cable from the line-out jack of
your external device to this line-in jack.
•
Mic-in Jack (Pink - CN8)
This jack is used to connect an external microphone. Use the C-
Media application software to select between using this jack and
the front audio’s mic-in jack.
Front Audio
The front audio connector (J9) provides you the option of
connecting devices to the line-out and mic-in jacks at the front panel.
Using this line-out jack disables the rear audio’s line-out function. Use
the C-Media application software to select between using this mic-in
jack and the rear audio’s mic-in jack.
Remove the jumper caps from pins 5-6 and pins 9-10 of J9 prior to
connecting the front audio cable connector. Make sure pin 1 of the
cable connector is aligned with pin 1 of J1. If you are not using this
connector, make sure to replace the jumper caps back to their
original pin locations.
The front audio is disabled.
The rear audio is enabled.
The front audio is enabled.
The rear audio is disabled.
Pins 5-6 and 9-10 short
(default)
Pins 5-6 and 9-10 open
4-Channel Audio
The 4-channel connector (J10) supports four audio output signals:
center channel, subwoofer, rear right channel and rear left channel. The
four audio output signals together with the line-in and mic-in jacks
(at the rear panel) support 6-channel audio output.
One card-edge bracket, mounted with a rear jack and a center/
subwoofer jack, will be provided as an option. Remove the jumper
caps from pins 2-4 and pins 6-8 of J10 prior to connecting the
audio cable connector. Make sure pin 1 of the cable connector is
