39
2
Hardware Installation
Front Panel Connectors
HDD-LED - HDD LED
This LED will light when the hard drive is being accessed.
RESET SW - Reset Switch
This switch allows you to reboot without having to power off the system.
PWR-BTN - Power Switch
This switch is used to power on or off the system.
PWR-LED - Power/Standby LED
When the system’s power is on, this LED will light. When the system is in the S1
(POS - Power On Suspend) state, it will blink every second. When the system is
in the S3 (STR - Suspend To RAM) state, it will blink every 4 seconds.
HDD-LED
RESET-SW
PWR-LED
PWR-BTN
12 11
2 1
Pin
Pin Assignment
Pin
Pin Assignment
HDD-LED
3
HDD Power
PWR-LED
2
LED Power
5
Signal
4
LED Power
RESET SW
7
Ground
6
Signal
9
RST Signal
PWR-BTN
8
Ground
11
N.C.
10
Signal
Содержание OT951-D Series
Страница 1: ...OT951 D Series System Board User s Manual A21640353 ...
Страница 72: ...72 4 Supported Software 3 Click Exit ...
Страница 74: ...74 4 Supported Software 4 After completing installa tion click Finish 3 Click Express and then click Next ...
Страница 83: ...83 4 Supported Software 7 Click Install 8 The setup program is cur rently installing the driver 9 Click Finish ...