DFI NP951-B16C Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 132

DFI NP951-B16C Скачать руководство пользователя страница 2

Copyright

This  publication  contains  information  that  is  protected  by  copyright.  No  part  of  it
may  be  reproduced  in  any  form  or  by  any  means  or  used  to  make  any  transfor-
mation/adaptation  without  the  prior  written  permission  from  the  copyright  hold-
ers.

This  publication  is  provided  for  informational  purposes  only.    The  manufacturer
makes  no  representations  or  warranties  with  respect  to  the  contents  or  use
of  this  manual  and  specifically  disclaims  any  express  or  implied  warranties  of
merchantability  or  fitness  for  any  particular  purpose.  The  user  will  assume  the
entire  risk  of  the  use  or  the  results  of  the  use  of  this  document.  Further,  the
manufacturer  reserves  the  right  to  revise  this  publication  and  make  changes  to
its contents at any time, without obligation to notify any person or entity of such
revisions or changes.

© 2009. All Rights Reserved.

Trademarks

Windows

®

2000 and Windows

®

XP are registered trademarks of Microsoft Corpo-

ration. Award is a registered trademark of Award Software, Inc. Other trademarks
and registered trademarks of products appearing in this manual are the proper-
ties of their respective holders.

«
1
2
3
4
...
»

Содержание NP951-B16C





































































































































Отзывы:

Нет отзывов