manualshive.com logo in svg

DFI NFII ULTRA-A, Руководство пользователя, Страница: 61 / 114

Поделиться
Скачать
DFI NFII ULTRA-A Скачать руководство пользователя страница 61

61

3

Award BIOS Setup Utility

3.1.3  Advanced Chipset Features

The settings on the screen are for reference only. Your version may not be
identical to this one.

This section gives you functions to configure the system based on
the specific features of the chipset. The chipset manages bus speeds
and access to system memory resources. 

These items should not

be altered unless necessary.

 The default settings have been chosen

because they provide the best operating conditions for your system.
The only time you might consider making any changes would be if
you discovered some incompatibility or that data was being lost
while using your system.

3.1.3.1  System Performance

This field is used to configure the system’s performance.

Optimal

This option provides the most stable system
performance.

Aggressive

This option uses the overclock settings for higher
performance but with higher risk of instability.

Turbo

This option uses the overclock setting for higher
performance but with higher risk of instability.

Expert

This option allows you to manually configure the
“CPU Interface” and “Memory Timings” fields.

Содержание NFII ULTRA-A



















































































































Отзывы:

Нет отзывов