DFI nF4 Ultra-DAGF, Руководство пользователя

Страница: 11 / 119

1
Introduction
11
CPU Overheat Protection
CPU Overheat Protection has the capability of monitoring the CPU’s
temperature during system boot up. Once the CPU’s temperature
exceeded the temperature limit pre-defined by the CPU, the system
will automatically shutdown. This preventive measure has been added
to protect the CPU from damage and insure a safe computing
environment.
DDR
Double Data Rate SDRAM (DDR SDRAM) is a type of SDRAM
that doubles the data rate through reading and writing at both the
rising and falling edge of each clock. This effectively doubles the
speed of operation therefore doubling the speed of data transfer.
6-channel Audio
The audio jacks at the rear panel will support 6-channel audio only
when the audio utility is configured to support this function. The mic-
in at the rear will be disabled. Use the front audio’s mic-in jack.
S/PDIF
S/PDIF is a standard audio file transfer format that transfers digital
audio signals to a device without having to be converted first to an
analog format. This prevents the quality of the audio signal from
degrading whenever it is converted to analog. S/PDIF is usually
found on digital audio equipment such as a DAT machine or audio
processing device. The S/PDIF connector on the system board sends
surround sound and 3D audio signal outputs to amplifiers and
speakers and to digital recording devices like CD recorders.
Serial ATA Interface with NVIDIA RAID
Serial ATA is a storage interface that is compliant with SATA 1.0
specification. The nForce4 Ultra chipset supports 4 Serial ATA ports
with speed of up to 3Gb/s which is twice as fast as the standard
1.5Gb/s speed suppor ted by the nForce4 chipset. Serial ATA
improves hard drive performance faster than the standard parallel
ATA whose data transfer rate is 100MB/s. The system board
supports NVIDIA RAID that allows RAID arrays spanning across 4
Serial ATA and Parallel ATA drives. It supports RAID 0 and RAID 1.