63
3
Award BIOS Setup Utility
Init Display First
This field is used to select whether to initialize the AGP or PCI first
when the system boots.
AGP
When the system boots, it will first initialize the AGP.
PCI Slot
When the system boots, it will first initialize PCI.
Onboard AC97 Codec
Enabled
This option is used to enable the onboard AC97
codec.
Disabled
This option is used to disable the onboard AC97
codec. Disable the onboard AC97 codec when using a
6-channel audio CNR card or an audio PCI card.
IDE HDD Block Mode
Enabled
The IDE HDD uses the block mode. The system BIOS
will check the hard disk drive for the maximum block
size the system can transfer. The block size will depend
on the type of hard disk drive.
Disabled
The IDE HDD uses the standard mode.
KBC Input Clock
This is used to select the input clock of your keyboard. The options
are: 8MHz and 12MHz. The default is 12MHz.
Keyboard/Mouse Power On
This field allows you to use the keyboard or PS/2 mouse to power-
on the system. To use this function, make sure JP1 is set to 2-3 On -
the Wake-On-Keyboard/Mouse function enabled. Refer to “Jumper
Settings for Wake-On-Keyboard/Wake-On-Mouse” in chapter 2 for
more information.
Disabled
Default setting.
Warning:
If JP1 was previously enabled with a pass-
word set in the “KB Power On Password” field,
and now you wish to disable the keyboard
password function, make sure to set this field
to disabled prior to setting JP1 to disabled
