www.dfi.com
30
Chapter 6 Mounting Options
Chapter 6
Panel Mount
The panel mounting kit includes the following:
•
6 mounting clamps
Note:
The system unit used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
5. Slide the Panel PC to "wall mount bracket 1" to attach the two brackets with the hooks.
Then tighten the screw to secure the assembly in place.
Screw
2. Select a place on the panel (or wall) where you will mount the Panel PC.
3. Cut out a shape on the panel that corresponds to the Panel PC’s rear dimensions (210.5mm
x 132.2mm) and ensure that the Panel PC can be fitted into the panel properly.
Panel
Mounting hole
132.20
210.50
5
1. Before starting any installation procedures, attach the poron foam to the Panel PC.
Poron foam
