background image

21

Chapter 7 Supported Software

www.dfi.com

Chapter 7

Component

Support Status

HDMI Video 

Output

If users want to change HDMI resolution (i.e. 1920x1080), they need 

to modify kernel parameter to change LVDS resolution to 1920x1080 too.

Mini PCIe

1. Support "busybox lspci" console command for check PCIe card status. 

2. For standard product, we only port ENLi AP12356 WiFi/BT module.

UART1 - RS485

Support Loopback test, BR 115200 by DFI Android UART demo APP 

(supoprt by request)

UART2 - RS422

Support Loopback test, BR 115200 by DFI Android UART demo APP 

(supoprt by request)

SPI2 Nor-Flash

Support SPI2 Nor-Flash boot (Uboot image only)

RTC

Support Android->Settings->Date to set system time function.

Thermal Sensor

Support read device temperature (degrees C) by Android CPU-Z APP 

installed by user

Debug Serial 

Port

Suport read Linux kernel debug log by serial port, use PC serial terminal 

tool (ex. PuTTY), BR 115200

Play Video

Support play MPEG4 file by Android AOSP Gallery APP.

Watchdog

Support adb shell command "am hang --allow-restart" to test Watchdog 

reboot function

WiFi/BT

1. Support AP12356 WiFi/BT module

2. AP12356 WiFi:

   (1) Support WiFi STA Mode (connect WiFi AP) by Android UI to enable/

        disable it.

   (2) Support Soft AP Mode (enable DHCP/IPv4 routing) by Android UI to   

        enable/disable it.

   (3) Support Android UI to set up Soft AP information

   (4) Support Android Airplane mode to disable WiFi function

   (5) Not support STA mode and Soft AP mode enable at the same time

   (6) Not support other WiFi modes, i.e. Wi-Fi Direct, Miracast, Wi-Fi 

        TimeSYnc, etc.

   (7) STA mode limitation: when plug-in wired LAN, STA mode will 

        disconnect automatically by Android network framework limitation

3. AP12356 BT:

   (1) Support BT connected and enable/disable by Android UI

   (2) Support BT files transfer by OPP profile using "Bluetooth File  

        Transfer" tool.

   (3) Support OPP, FTP, OBEX, SDAP profile only

   (4) Not support other BT profiles which are not listed above

   (5) Suppot Android Airplane mode to disable BT function

Component

Support Status

Android Build 

Type

ENG Build without SELinux

Android ADB

Support 

Android Factory 

Reset 

Support

Android 

Fastboot

Not support

Android OTA

Not support

Android CTS

Not support

Android GMS/

GTS

Not support

Android Suspend

Not support suspend, set never to suspend by default.

Preload Android 

APPs

1. AOSP Browser: Web Browser

2. AOSP Calculator: Calculator APP

3. AOSP Calendar: Calendar APP

4. AOSP Clock: Clock APP, support alarm wake-up

5. AOSP Contacts: function not ready, preload for 3G module test in the 

future

6. AOSP Dev Tools: develop test tool

7. AOSP Downloads: show downloads APP

8. AOSP Email: E-Mail APP

9. AOSP Gallery: Gallery APP (JPEG)

10. AOSP Messaging: Short Message Service (SMS) APP. Function not 

ready, preload for 3G module test in the future.

11. AOSP Music: Play music APP (MP3)

12. AOSP Phone: function not ready, preload for 3G module test in the 

future. 

13. AOSP Settings: Android Settings APP

14. AOSP Sound Recorder: Sound Recorder APP. Function not ready, 

preload for AOSP Audio module test in the future

15. NXP Audio Route (*): function not ready, preload for Audio module 

test in the future.

16. NXP Ethernet (*): Ethernet settings APP.

17. Open-source Simple Explorer: File Explorer APP

(*) This feature depends on the NXP’s support.

Содержание KS057R-FS






















Отзывы: