www.dfi.com
18
Chapter 6 Mounting Options
Chapter 6
Chapter 6 - Mounting Options
Din-rail Mount
Note:
The system unit used in the following illustrations may not resemble the actual one.
These illustrations are for reference only.
The wall mount kit includes the following:
•
2 wall mount mount brackets
•
4 bracket screws
2.
Install the device onto the rail.
1.
Use the provided mounting screws to attach wall mount brackets to both sides of the device.
The following pictures show the two ways in which the brackets can be attached.
2
Fix the device on the wall. The following picture shows the dimensions and location of wall
mount screw holes.
The DIN-rail mount kit includes the following:
•
DIN-rail mount brackets
•
4 bracket screws
1.
Use the provided mounting screws to attach the DIN-rail mount brackets to the rear side of
the device. Note that the connector panel should be at the bottom.
Mounting screws
Din-rail mount bracket
Wall Mount
170.20
121.00
186.00
95.80
170.20
121.00
186.00
95.80
1. Flush with the rear side
2. Flush with the front panel
Unit: mm
