DFI KD630-H110, Руководство пользователя

Страница: 39 / 47

37
Chapter 3
BIOS SETTINGS
User's Manual | KD630
SIO NUVOTON6106D
This section configures the system super I/O chip parameters.
X Advanced
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Configure Serial port using op -
tions: [Disable] No Configura -
tion [Enable] User Configuration
[Auto] EFI/OS chooses configu-
ration
SYS Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
CPU Smart Fan Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Fan Speed Count 3
Fan Speed Count 4
SYS Smart Fan 2 Control
Boundary 1
Boundary 2
Boundary 3
Boundary 4
Fan Speed Count 1
Fan Speed Count 2
Advanced
<Enable>
[30]
[40]
[50]
[60]
[30]
[40]
[50]
[75]
<Enable>
[30]
[40]
[50]
[60]
[30]
[40]
[50]
[75]
<Enable>
[30]
[40]
[50]
[60]
[30]
[40]
SYS Smart Fan, CPU Smart Fan, SYS Smart Fan 2 Control
Enable or disable the system/CPU smart fan/fan 2.
Boundary 1 to Boundary 4
Set the boundary temperatures that determine the operation of the fan with different
fan speeds accordingly. For example, when the system or the CPU temperature reaches
boundary temperature 1, the system or CPU fan should be turned on and operate at
the designated speed. The range is from 0-127 ﾟ C.
Fan Speed Count 1 to Fan Speed Count 4
Set the fan speed. The range is from 1-100% (full speed).
InsydeH2O Setup Utility Rev. 5.0
F1 Help
Esc Exit
↑/↓ Select Item
←/→ Select Item
F5/F6 Change Values
Enter Select
X
SubMenu
F9 Setup Defaults
F10 Save and Exit
Configure Serial port using op -
tions: [Disable] No Configura -
tion [Enable] User Configuration
[Auto] EFI/OS chooses configu-
ration
Fan Speed Count 3
Fan Speed Count 4
COM Port 1
Base I/O Address
Interrupt
RS485 Auto Flow
COM Port 2
Base I/O Address
Interrupt
COM Port 3
Base I/O Address
Interrupt
COM Port 4
Base I/O Address
Interrupt
COM Port 5
Base I/O Address
Interrupt
COM Port 6
Base I/O Address
Interrupt
WDT
Case Open
► PC Health Status
Advanced
[50]
[75]
<Enable>
<3F8>
<IRQ4>
<Disable>
<Enable>
<2F8>
<IRQ3>
<Enable>
<3E8>
<IRQ4>
<Enable>
<2E8>
<IRQ3>
<Enable>
<2F0>
<IRQ4>
<Enable>
<2E0>
<IRQ3>
<Disable>
<Disable>
COM Port 1 to COM Port 6
Configure the settings to use the serial port.
Disable No configuration
Enable User configuration
RS485 Auto Flow
Enable or disable RS485 auto flow.
WDT
Enable or disable the Watchdog Timer (WDT) function. A counter will appear if you select to en-
able WDT. Input any value between 1 to 255 seconds.
▼
WDT = [Enable]
Counter
Set the timeout value of the WDT — 1-255 seconds.
Case Open
Enable or disable case open alert.
Clean Case Open Status
Clean current case open status including alert.