www.d
fi
.com
27
Chapter 2 Hardware Installation
Chapter 2
Standby Power LED
This LED will lit red when the system is in the standby mode. It indicates that there is power
on the system board. Power-off the PC and then unplug the power cord prior to installing any
devices. Failure to do so will cause severe damage to the motherboard and components.
Standby Power LED
1
5
C
7
Battery
S1
S3
2
2
10
9
2
10
9
Expansion Slots
PCI Express x16 Slot
Install PCI Express x16 graphics card, that comply to the PCI Express specifications, into the
PCI Express x16 slot. To install a graphics card into the x16 slot, align the graphics card above
the slot then press it down firmly until it is completely seated in the slot. The retaining clip of
the slot will automatically hold the graphics card in place.
PCI Slot
The PCI slot supports expansion cards that comply with PCI specifications. You can install a
PCI expansion card or a customized riser card designed for only 2 PCI slots expansion (for low
profile PCI card only) into the PCI slot.
mSATA Port
The mSATA port supports SATA III (6Gb/s) transmission rate and is used to connect an mSATA
card. It can expand the system’s storage capacity. SATA 4 and mSATA signals can be switched
with a jumper.
Mini PCIe Socket (for KD600-Q170 only)
The full-size Mini PCIe socket supports USB/Mini PCIe/mSATA signals and is used to install a
Mini PCIe card. Mini PCIe and mSATA signals can be switched with a jumper.
PCI Express x16
PCI 3
PCI 4
PCI 2
PCI 5
PCI 1
1
5
C
7
Battery
S1
S3
2
2
10
9
2
10
9
PCI 6
mSATA
Mini PCIe
(for KD600-Q170
only)
