DFI G586SPB AIO, Руководство пользователя

Страница: 11 / 65

11
1. Unlock your system unit. Turn off the power and disconnect all
power cords and cables.
2. Remove the system unit cover. Refer to the manufacturer’s instruc-
tions if necessary.
3. Detach all connectors from the old system board and remove ex-
pansion cards seated in any expansion slots.
4. Loosen the screws holding the original system board and remove
the board from the system. Save the screws.
5. Remove the G586SPB AIO from its original packing box. Be careful
to avoid touching all connectors and pins on the board. Please refer
to the handling instructions on pages 9-10 for proper handling tech-
niques.
6. Insert the memory modules into the memory banks on the
G586SPB AIO. The quantity and location of the memory modules
depends on the memory configuration and type of modules you in-
tend to use.
7. Insert the cache module, if any, into the cache module slot on the
G586SPB AIO. Refer to the Cache Memory section for upgrading
your cache memory.
8. Install the CPU. Be sure pin 1 of the CPU is aligned with pin 1 of
the socket.
9. Set the corresponding jumpers.
10. Install the prepared G586SPB AIO system board into the case and
replace the screws.
11. Reinstall all cards and connectors and replace the system unit
cover. Reconnect all power cords and cables.