G586OPB
For operating systems that require track remapping, the
drive type must be set to “Not Installed” in the CMOS
setup.
Example:
A user has four 806MB drives with the following
parameters: CYL=1600, HEAD=16, SECTOR=63.
Case 1:
Drive 0 = Master drive of primary IDE
M/B Drive C = type 47
Drive 1 = Slave drive of primary IDE
M/B Drive D = non-installed
Drive 2 = Master drive of secondary IDE Unrelated to M/B CMOS setup
Drive 3 = Slave drive of secondary IDE
Unrelated to M/B CMOS setup
Drive 0 is controlled by the system BIOS, no track
remapping is allowed and the maximum capacity that
can be used under DOS/Windows is 528MB.
Drives 1, 2 and 3 are not initially controlled by the
system BIOS: track remapping is allowed and the
drive's full capacity is available under DOS/Windows.
Case 2:
Drive 0 = Master drive of primary IDE
M/B Drive C = type 47
Drive 1 = Slave drive of primary IDE
M/B Drive D = type 47
Drive 2 = Master drive of secondary IDE Unrelated to M/B CMOS setup
Drive 3 = Slave drive of secondary IDE
Unrelated to M/B CMOS setup
Drives 0 and 1 are initially controlled by the system
BIOS, no track remapping is allowed and the maxi-
mum capacity that can be used under DOS/Windows is
528MB.
Drives 2 and 3 are not controlled by the system BIOS;
track remapping is allowed and the drive's full capac-
ity is available under DOS/Windows.
IDE Device Drivers
u
4-2
Содержание G586OPB
Страница 1: ...G586OPB Rev 0 SystemBoard User sManual D27850601...
Страница 104: ...G586OP A Rev 0 SystemBoard User sManual...
Страница 105: ...G586OP A Rev 0 SystemBoard User sManual 27850601...
Страница 106: ...G586OP A Rev 0 SystemBoard User sManual...
