manualshive.com logo in svg

DFI G486VPC, Руководство пользователя

Поделиться
Скачать
DFI G486VPC Скачать руководство пользователя страница 29

29

Note:

Only IDE hard drives or ATAPI CD-ROMs can be connected to the IDE
interface.

Connecting the IDE Hard Disk Interface

To prevent improper IDE cable installation, each PCI IDE shrouded
header has a keying mechanism. The 40-pin connector on the IDE
cable can be placed into the header only if pin 1 of the connector is
aligned with pin 1 of the header.

Header

Note:

The IDE cable with a standard 40-pin connector (without the keying
mechanism) can be installed in the PCI IDE shrouded header. Be ex-
tremely careful to match the colored edge of the ribbon with pin 1 of the
header.

Keying mechanism

Connecting the Hard Disk Cable

1.

If you are connecting two hard drives, install the 40-pin connector of
the IDE cable into the primary IDE shrouded header (connector J8).
If you are adding a third or fourth IDE device, install the 40-pin
connector of the other IDE cable into the secondary IDE shrouded
header (connector J9).

Содержание G486VPC































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды